Joint Sealing Machine FVM 200

Technical data

(self-propelled Joint Sealing Machine)

FVM 200 tandem chassis

·   deadweight: approx. 1970 kg
·   length: 4900 to 5250 mm
·   width: 1750 mm
·   height: 2150 to 2350 mm

Construction

  • spring-loaded tandem chassis with overrun brake system
  • automatic brake adjustment and parking brake
  • height adjustable towing device
  • engine control in main operating area
  • safety flash light
  • safety grating on the right side
  • individual licence according to StVO
  • permissible maximum weight 2700 kg
  • 12 volts lighting equipment, 13 pole connector
  • top cover with preheating function
  • double-walled isolated melting pot with melting grid
  • indirect heated melting pot with thermal oil filling
  • hydraulic driven stirring unit
  • circulating pump for thermal oil cover
  • magnetic coupled pump on the hydraulic engine
  • effective material preperation 200 l
  • toolbox

Drive

  • robust 3-cylinder KUBOTA diesel engine, water-cooled
  • electric starter with battery master switch
  • 60 l diesel tank (optional 100 l)
  •  14,9 kW at 3600 rpm
  • engine cover

Hydraulic Drive

  • hydrostatic driven tandem chassis
  • hydraulic steering in rear operating area
  • gradeability up to 10 %
  • stepless variable driving speed up to 5 km/ h
  • hydraulic lift axle for a better manoeuvrability in self-propelled operation

Pouring Hose (standard)

  • spraying lancet with 4 meters pouring hose
  • pouring hose and lancet retainer for transport
  • preheating box for pouring hose
  • cleaning device for bitumen pipes
  • hose bracket for guidance during work

Internal Pump (standard)

  • delivery pump is located inside the melting pot
  • hydraulic driven pouring pump
  • stepless speed control
  • pump heating by potting material

Heated Pouring Hose (optional)

  • lancet with 6 meters pouring hose
  • adjustable temperature control up to 180 C
  • electric heated hose via vehicle voltage 24 volts DC
  • electromagnetic on/ off switch function of the delivery pump (switch function on the pouring lancet)
  • prevents hose plugging – pouring pump runs only during the pouring process
  • hose and lancet retainer for transport
  • pouring hose retainer for guidance during operation

External Pump (optional)

  • hydraulic driven pouring pump
  • stepless speed control
  • external pouring pump covered in thermal oil
  • enables an easy pump exchange

Edge Spray Bar (optional)

  • mechanical adjustable spray bar OR
  • hydraulical adjustable spray bar
  • 3 spray nozzles with pneumatic activation

Indirect Heating

Standard Oil Heating

  • 24 volts oil burner for light fuel oil or diesel
  • supply from diesel tank or additional tank
  • thermal oil safety limiter to interrupt the heating process
  • temperature control by thermal oil and pouring material  thermostat up to 300 C
  • gas bottle retainer
  • hand gas burner with accessories

Oil Heating (optional)

  • transformator 230 volts AC -> 24 volts DC
  • for external oil burner power supply
  • for preheating and keeping warm the thermal oil while the engine is switched off

Oil Burner (optional)

  • timer for an automatic oil burner starting process
  • power supply of 230 volts needed

Gas Heating (optional)

  • replaces the oil burner
  • spiral gas burner with safety pilot
  • automatic temperature control up to 300 C
  • retainer for 2 x 33 kg gas bottles
  • hand gas burner with accessories

Additional Electric Heating Rod (optional)

  • 3000 W, 230 volts
  • for a constant thermal oil temperature through an external power source up to 120 C

Options

  • LED – work lights
  • LED – warning signs for a better visibility
  • safety rails
  • plattform and occasional seat in operating area
  • spare wheel
  • hydraulic oil cooler
  • camera system with monitor for an even better all-round visibility
  • fire extinguisher
  • special painting in RAL colours

further options are available on request!